Global Sources
Ready to import from China? Find verified suppliers on Global Sources.
Share / Recommend:

Chinese suppliers’ lack of reliability: 5 tips for importers

by Renaud Anjoran in 'Quality Inspection Blog'

You import from China. You sell to customers who want the right quality at the right time. You know that, if you can’t deliver, they will go elsewhere.

And, on the other hand, your suppliers say “we’ll try our best, don’t worry”. And you know that they are late, say, 40% of the time, and that their products are substandard or defective 30% of time. Oh, and they might subcontract production without telling you about it, which makes things even worse.

As an importer, you have to make unreliable supply meet capricious demand.

How can you make demand less capricious, and make supply more reliable? Here are my 5 tips.

1. Manage your customer’s expectations

First, if you allow a domestic customer to enjoy the type of prices that are possible only when buying in low-cost Asia, he should understand that he cannot count on 100% reliability. If he is not willing to give up some reliability (in a reasonable measure) in order to get low prices, you’ll have a hard time satisfying him.

Second, some customers have expectations that are even unrealistic in their own country. I was recently discussing with a French importer who was in this case. He was given a mission to find wooden pallets that could comply with very strict requirements. But even in France, no wood mill would accept size specifications with 0.5cm tolerances, and an AQL of 2.5%!

2. Pick better suppliers

Some suppliers in China are excellent, and can be counted on. Some others are only capable of disasters. And the majority is somewhere between these two extremes.

I have written extensively about how to search new suppliers. It takes time. It is often a trial-and-error process. The first thing to understand is that, in China, the cheapest supplier is not the most reliable.

Be ready to pay a little more, and try to build long-term relationships with good suppliers.

3. Last-minute surprises WILL happen

I remember an American client who said to me “I have been buying in China for 10 years, and every time there seems to be some new problem that I never dealt with before.”

You can take some elementary precautions to reduce the impact of these bad surprises:

  • Add some padding in your schedule (at least 2 weeks, because you have to count on delays).
  • Try to catch quality issues as early as possible. Inspect quality early in the production cycle, and of course again before shipment.
  • If possible, keep a certain level of inventory in your warehouse, as a safety measure. There is a cost to it, but it is necessary until you can rely on your source.

4. Control your supply chain tightly

In the textile industry, which is a bit particular, I can distinguish three types of buyers:

The “wholesalers-importers”

They are based in the importing country and carry inventory. They typically purchase finished products under FOB terms, and don’t control much about their supply chain. But it is not a big problem. They can tolerate a certain proportion of cancelled/delayed shipments, because of the stock they have in hand.

The “importers-traders”

This category is basically identical to “wholesalers-importers”, except that they don’t carry any inventory and they typically sell each shipment to one specific customer.

This is the most risky situation to be in, since they don’t have much control BUT they have no inventory buffer to keep a customer waiting in case of delays/cancelations.

The “producers-traders”

They control the supply chain as much as possible. Some of them produce in their own factory. Most of them purchase the materials, manage new developments and approvals, and then pay production workshops for the assembly job (that’s called “CMT” in that industry).

If a factory does not give satisfaction, the “producers-traders” can quickly switch production to another, more reliable one.

5. Use a legally-enforceable contract

When things start to go wrong, you need leverage to get the manufacturer back on track. If you have already pre-paid the whole amount and if they have chopped no OEM agreement, you are in big trouble.

I am not an expert on this subject. Consult with a lawyer who knows China business. A good contract can address all the sensitive issues. If you feel that you can force your suppliers to sign a contract, read more about this here.


In short, if you don’t control your supply chain and if you don’t carry inventory, you need to monitor production closely, get a contract in place if possible, and manage your customers’ expectations… While slowly improving your supplier base.

Do you see other solutions?

Renaud Anjoran is the founder of Sofeast Quality Control and helps importers to improve and secure their product quality in China. He writes advice for importers on the Quality Inspection blog. He lives full time in Shenzhen, China. You can contact him at This email address is being protected from spambots. You need JavaScript enabled to view it..

Add comment

Security code

Stay Connected

Get Import from China Headlines by E-mail

Attend the Global Sources Summit

  • For online & Amazon sellers
  • Interactive training led by sourcing & Amazon experts
  • Learn how to source profitably, avoid pitfalls
  • April 17 - 19, 2017 in Hong Kong
  • Co-located with Mobile Electronics and
    Gifts & Home shows

Learn More

Join the Smart China Sourcing Facebook Group
  • Connect with other buyers
  • Ask questions
  • Get advice from experts

Join Group

Join Global Sources on Facebook

Be our fan now for the latest sourcing news, practical sourcing guides and expert advice.

Follow Global Sources on Twitter

We'll keep you updated with tweets on sourcing news, trade resources & more.